HTS 190/210 (Autocar & Spartan) Single Axle Spring
Suspension
Click on the part number for pricing and information!
| HTS 190/210 (Autocar & Spartan) Single Axle Spring Suspension | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 | 338-1828 | Assembly, Hanger; Front | 2 | 58425-1 | Integral Wear Pad; Replaces 338-1258 (50752-1) |
| 2 | 334-1603 | Kit, Wear Pad | 2 | 56557-5 | Current; Pin Type |
| 3 | 334-526 | Shim; 1/16″Thk 4 3/8″ c/c | AR | 49689 | |
| 4 |
SP
|
Spacer | 4 | 59946-2 | Autocar |
| 5 |
SP
|
Assembly, Bolt; 1/2″ x 5″Lg | 2 | ||
| 6 | 334-768 | Assembly, Bolt; 5/8″-18 x 4 1/2″Lg | 4 | 955375 | Incl. Bolt & Hdwe. |
| 7 |
SP
|
Hanger, Rear | 2 | 50025-1 | Casting No. 49954 |
| 8 | 334-786 | Bolt Assembly; 1/2″-20 x 5″Lg | 2 | Incl. Bolt & Hdwe. | |
| 9 |
SP
|
Roller, Rebound | 4 | 58636 | |
| 10 |
SP
|
Bump Stop | 2 | 69883, | Spartan |
| 11 |
SP
|
Plate, Backing | 2 | 69887-1 | Spartan |
| 12 | 338-766 | Saddle, U-Bolt | 2 | 48797, 47446 | |
| 13 | 338-2103-2 | Assembly, Spring Seat; 2° | 2 | 66086-203 | Confirm Pinion Angle |
| 14 | 334-931 | Assembly, Stud; Axle Seat | 4 | 50918 | Incl. Stud, Washer & Nut |
| 15 |
SP
|
Torque Rod | 2 | 62044-495 | Spartan |
| 15 |
SP
|
Torque Rod | 2 | 62044-505 | Autocar |
| 16 | 321-223 | Bushing; 4 3/8″ c/c x 5/8″ Bolts | 4 | 47691 | Straddlemount |
| 17 |
SP
|
Cap, Axle Bottom | 2 | 50216 | Confirm Pinion Angle |
| 18 |
SP
|
Bracket, Lower Shock; Roadside | 1 | 67556-3 | |
| 18 |
SP
|
Bracket, Lower Shock; Curbside | 1 | 67556-4 | |
| 19 | 361-340 | Kit, U-Bolt; Round Bend, Grade 8 | 4 | 7/8″ x 3″ x 19 1/2″ R | |
| 20 | 334-710 | Washer, Conical U-Bolt; 7/8″ | 4 | 48574 | |
| 21 |
SP
|
Shock Absorber | 2 | 60665-25 | |
| 22 | 334-1782 | Bolt Assembly; 3/4 x 4″Lg | 4 | 50764-4 | |
| 23 |
SP
|
Shock Bracket, Upper | 2 | 67530 | |
| 24 |
50-473
|
Assembly, Leaf Spring | 2 | HTS 190 | |
| 24 |
50-475
|
Assembly, Leaf Spring | 2 | HTS 210 | |
PRIMAAX EX® 232/462/692, 262/522/782; FIREMAAX EX®
242/482, 272/542 Single/Tandem Axle Air Suspensions
Click on the part number for pricing and information!
| PRIMAAX EX® 232/462/692, 262/522/782; FIREMAAX EX® 242/482, 272/542 Single/Tandem Axle Air Suspensions |
|||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
338-2237
|
Hanger | 2 | 67706 | 8.5″-10.5″ Ride Ht. |
| 1 |
SP
|
Hanger | 2 | 67222 | 10″ Ride Hgt; Mack/Volvo |
| 1 |
SP
|
Hanger; LH | 1 | 67299-1 | 12.5″, 14.4″ & 15.5″ Ride Ht; IH & CAT EX232 13″; KW EX232/262T |
| 1 |
SP
|
Hanger; RH | 1 | 67299-2 | 12.5″, 14.4″ & 15.5″ Ride Ht; IH & CAT EX232 13″; KW EX232/262T |
| 2 | 334-1698 | Kit, Service; Pivot Bushing | 2 | 60632-20, 60632-8 | Standard; Incl. Alignment Collars |
| 2 |
334-1698A
|
Kit, Service; Pivot Bushing | 2 | 60961-720 | Incl. Alignment Collars; (1) Beam End |
| 3 | 334-1699 | Kit, Service; Alignment | 2 | 60632-19, 60632-6 | Standard |
| 3 |
SP
|
Kit, Service; Alignment; Severe Service | AR | 60632-15 | 1 1/4″ Bolt |
| 4 | 334-1712 | Assembly, Bolt; 1″-8 x 7 1/2″Lg | 2 | 60632-18, 60632-5 | |
| 5 |
See Chart
|
Bracket, Top Cap | 2 | 65289-xxx, 65210-xxx | See Chart |
| 6 | 361-627 | Kit, U-Bolt; 3/4″ x 6 3/8″ x 9″Lg | 4 | ||
| 6 |
361-661
|
Kit, U-Bolt; 3/4 x 6 3/8″ x 10″Lg | 4 | ||
| 6 |
361-662
|
Kit, U-Bolt; 3/4 x 6 3/8″ x 11″Lg | 4 | ||
| 6 |
361-663
|
Kit, U-Bolt; 3/4 x 6 3/8″ x 12″Lg | 4 | ||
| 7 |
See Chart
|
Bracket, Bottom Cap | 2 | Various | See Chart |
| 8 |
See Chart
|
Spacer, Axle | 2 | Various | See Chart |
| 9 |
DIA
|
Beam | 2 | Various | Not Available Separately, Must Order U-Beam Assembly; See Charts |
| 10 |
DIA
|
Cross Tube | 1 | Various | Not Available Separately, Must Order U-Beam Assembly; See Charts |
| 11 |
See Chart
|
U-Beam Assembly | 1 | 67249-xxx | See Chart |
| 12 | 321-387 | Bushing, Pivot | 2 | 58648 | Early; Replace w/321-523 |
| 12 |
321-523
|
Bushing, Pivot | 4 | 70425-1 | Improved Durability; Order 334-1698 or 1698A Kit |
| 13 | 321-388 | Bushing; “D” Pin | 2 | 60383 | Use w/ 3/4″ Bolts |
| 13 | 321-512 | Bushing; “D” Pin | 2 | 65381 | 7/8″ Bolts |
| 14 | 334-626 | Assembly, Bolt; 3/4″-10 x 5″Lg | 4 | 21867-36 | Incl. Bolt & Hdwe. |
| 14 | 334-1117 | Assembly, Bolt; 3/4″-16 x 5 1/2″Lg | 4 | 21777-26 | Incl. Bolt & Hdwe. |
| 14 | 334-1701 | Assembly, Bolt; 7/8″-14 x 5 1/2″Lg | 4 | 30418-9 | All |
| 14 |
SP
|
Assembly, Bolt; 7/8″-14 x 5″Lg | 4 | 30418-11 | KW EX262; 10″ Ride Hgt |
| 15 |
67043-002
|
Air Spring | 2 | 67043-2 | PMXEX; 8.5-10.5″ Ride Hgt; KW EX232 10″ |
| 15 |
67392-002
|
Air Spring | 2 | 67392-2 | FMXEX; 8.5-10.5″ Ride Hgt |
| 15 |
67234-002
|
Air Spring | 2 | 67234-2 | IH EX232 9-10.5″ Ride Hgt |
| 15 |
67247-002
|
Assembly, Air Spring | 2 | 67247-2 | PMXEX262; 8.5-10″ Ride Hgt; KW EX262 10″/EX262S 8.5″ & 10″ |
| 15 |
68056-002
|
Assembly, Air Spring | 2 | 68056-2 | FMXEX272; 8.5-10″ Ride Hgt; IH PMXEX262 9″,CAT 262S |
| 15 |
67391-002
|
Air Spring | 2 | 67391-2 | PMXEX; 12.5″, 14.4″ & 15.5″ Ride Hgt; KW EX232T |
| 15 |
67044-002
|
Assembly, Air Spring | 2 | 67044-2 | KW EX262T; 15.5″ Ride Hgt |
| 15 |
67923-002
|
Assembly, Air Spring | 2 | 67923-2 | IH & CAT EX232T 13″ Ride Hgt |
| 15 |
SP
|
Assembly, Air Spring | 4 | 68070-2 | Caterpillar & IH |
| 16 |
SP
|
Bracket, Upper Air Spring | 2 | 65031-3 | 14.4″ Ride Hgt |
| 16 |
SP
|
Bracket, Upper Air Spring | 2 | 65031-4 | 15.5″ Ride Hgt |
| 17 |
SP
|
Bracket, Lower Air Spring | 2 | 60911-2 | |
| 18 |
SP
|
Gusset, Air Spring | 1 | 59479-3 | (a); If Equipped |
| 18 |
SP
|
Gusset, Air Spring | 1 | 59479-4 | (b); If Equipped |
| 19 |
SP
|
Kit, Service; T/R Fasteners | 2 | 49176-32 | 5/8″ x 8″; (1) Rod |
| 19 |
SP
|
Kit, Service; T/R Fasteners | 2 | 5/8″ x 8″, 3/4″ x 6″; (1) Rod | |
| 20 | 334-526 | Shim; 1/16″Thk 4 3/8″ c/c | AR | 49689 | |
| 21 |
See Chart
|
Torque Rod Assembly | 2 | Various | See Chart |
| 22 |
SP
|
Track Rod | 1 | 72000-xxxS | Ultra-Rod Plus; Specify Length; 321-500 Bushing |
| 22 |
SP
|
Track Rod | 1 | 62250-xxx | Indiana Pheonix/Terex Advance; Specify Length; 321-223 & 321-361 Bushings |
| 22 |
SP
|
Track Rod | 1 | 62000-620 | Oshkosh; 321-223 Bushing |
| 22 |
SP
|
Track Rod | 1 | 67428-565 | KW EX232; 10″ Ride Hgt |
| 22 |
SP
|
Track Rod | 1 | 72000-560C | KW EX262; 10″ Ride Hgt; 262S 8.5 & 10″; 232/262T 15.5″ (321-500) |
| 22 |
SP
|
Track Rod | 1 | 62011-xxxN | IH EX232T; 13″ Ride Hgt Specify Length; 321-223 |
| 23 | 321-500 | Bushing; 4 3/8″ c/c x 5/8″ Bolts | AR | 64400-2 | |
| 23 | 321-223 | Bushing; 4 3/8″ c/c x 5/8″ Bolts | AR | 47691 | Straddlemount |
| 23 | 321-361 | Bushing, Taper Pin | AR | 64809 | |
| 23 | 321-366 | Bushing; 4 3/8″ c/c x 3/4″bolts | AR | 69210 | EX262/272 Axle End |
| 24 | 338-181 | Bracket, Track Rod/Frame | 1 | 22186 | For 5/8″ Bolts |
| 25 |
SP
|
Stop, Axle; Frame Mounted | 1 | 60593-1 | (a) EX232 8.5″ Ride Hgt |
| 25 |
SP
|
Stop, Axle; Frame Mounted | 1 | 60593 | (a); Except EX232 8.5″ Ride Hgt |
| 25 |
SP
|
Stop, Axle; Frame Mounted | 1 | 64692-xxx | (b), (c); Specify Fore/Aft Axle & Make; 12.5″, 14.4″ & 15.5″ Ride Hgt |
| 25 |
SP
|
Stop, Axle; Frame Mounted | 2 | 65570-1 | (c); IH & CAT 232EX; 13″ Ride Hgt |
| 25 |
SP
|
Stop, Axle; LH/RH | 2 | 69580, 69581 | (d); KW EX232/262T; 15.5″ Ride Hgt; Not Shown |
| 26 |
341-60657-4
|
Shock Absorber | 2 | 60657-4 | Can Use M65504 |
| 26 |
SP
|
Shock Absorber | 2 | 60665-13, 60665-15 | EX262 Specify Drum or Disc Brake |
| 26 |
341-60657-3
|
Shock Absorber | 2 | 60657-3 | KW EX232; 10″ Ride Hgt Ex Triaxle; IH 9″ & 10.5″ |
| 26 |
341-60657-5
|
Shock Absorber | 6 | 60657-5, | KW EX232; 10″ Ride Hgt Triaxle |
| 26 |
M65504
|
Shock Absorber | 4 | 60657-7 | Mack EX232/462/692 |
| 27 |
SP
|
Bracket, Upper Shock Frame | 2 | 67463-2 | Cast |
| 27 |
SP
|
Bracket, Upper Shock Frame | 2 | 59423-1 | Stamped |
| 27 |
SP
|
Bracket, Upper Shock Frame | 2 | 67463-6 | Mack/Volvo |
| 28 |
SP
|
Kit, Service; Shock Fastener | 2 | 50754-30 | PMXEX232, FMXEX242, 4.25/6 |
| 28 |
SP
|
Kit, Service; Shock Fastener | 2 | 50754-29 | PMXEX262/262S, FMXEX272, 4.25/7 |
| 28 |
SP
|
Kit, Service; Shock Fastener | 2 | 50754-12 | KW EX232/262T; 15.5″ Ride Hgt (3.75/6) |
| 29 | 334-1648 | Valve, Height Control; w/Dump | 1 | 57977 | |
| 30 | 334-751 | Linkage Assembly; Universal Adjustable | 1 | 3 5/8″-19 5/8″ Range; Use w/All Height Control Valves | |
| 31 |
SP
|
Bracket, HCV Linkage | 1 | 60921 | |
| 32 | 334-1701 | Assembly, Bolt; 7/8″-14 x 5 1/2″Lg | 2 | 58821-12 | All |
| 33 |
SP
|
Spacer, Torque Rod | 4 | 67045-xxx | IH 232EX 9,10.5″; Specify Spacer Thickness |
| 34 |
SP
|
Bracket, “S” Cam | 4 | 64508-xxx | See Part Number on Component |
| 35 |
SP
|
U-Bolt, “S” Cam | 4 | 64202 | |
| 36 |
334-2028
|
Tool, Pivot Bushing Replacement | AR | 66086-203 | Not Shown |
| 37 | 334-1918 | Lubricant, Extreme High Pressure | AR | Recommended Tool Thread Lubricant | |
| 38 | 334-1665 | Lubricant, Bushing Installation | AR | Not Shown | |
R 400/460/480/520 Tandem Suspensions
Click on the part number for pricing and information!
| R 400/460/480/520 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
SP
|
Assembly, Saddle | 2 | 49197-000 | Specify Height “A” |
| 1 |
SP
|
Assembly, Saddle | 2 | 50207-000 | Specify Height “A” |
| 2 | 338-1831 | Cap, Saddle | 4 | 58795 | R400/520; Replaces 338-148 |
| 3 | 334-174 | Assembly, Stud; 7/8″-14 x 4 7/8″Lg | 8 | 6696 | Incl. Stud, Lock Nut & Washer |
| 4 | 334-150 | Washer, Hard Flat; 7/8″ | 8 | 22962-2 | |
| 5 |
SLN-106
|
Nut, Lock; 7/8″-14 | 8 | 0002-09 | |
| 6 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 7 | 321-243 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 49400 | High Confinement; 400 Series; Standard |
| 7 | 321-244 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 49600 | High Confinement; 400 Series; Standard |
| 7 | 321-124 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 29483-5 | Severe Duty; Fully Bonded; w/Transverse Rods |
| 7 | 321-510 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 34013-97 | R520 |
| 8 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | R400 & 460 Series |
| 8 | 334-1126 | Cross Tube; 46″Lg | 1 | 7622-3 | R480 & 520 Series |
| 9 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | Incl. Keys 10-13 for (2) Beams |
| 9 | 322-102A | Kit, Bushing; Bronze Center | 2 | 34013-54 | For (1) Beam |
| 10 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 11 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 12 | 334-115 | Seal; 3 7/16″ID x 4 3/4″OD x 1/4″Thk | 4 | 30334 | |
| 13 | 334-116 | Washer; 3 1/2″ID x 5 3/4″OD x 1/8″Thk | AR | 32365 | |
| 14 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 15 | 334-830 | Kit, Service; Bar Pin Bushing; Non Shim | 4 | 34013-87 | Incl. Bar Pin Bushing & Mounting Hdwe. |
| 16 | 334-831 | Kit, Service; Bar Pin Bushing; Shim Type | 4 | 34013-88 | Incl. Bar Pin Bushing, Alignment Shims & Mounting Hdwe. |
| 16 | 334-1957 | Kit, Service; Rotating Bar Pin Bushing; Shim Type | 4 | 34013-188 | Incl. Bolts & Shims |
| 17 | 334-879 | Shim; 3/16″ | AR | 50130 | |
| 17 | 334-880 | Shim; 1/8″ | AR | 50131 | |
| 17 | 334-881 | Shim; 3/8″ | AR | 57026 | |
| 18 |
SP
|
Kit, Bar Pin End Bushing Tool | 1 | 1749 | |
| 19 | 345-897 | Kit, Torque Rod; Straddle/Taper Pin | 1 | 60215 | Use 345-610 & 345-681 |
| 19 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 19 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | 2 | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 19 | 345-681 | Torque Rod End; Male; Taper Stud; 22 1/2″Lg | 2 | 66681, 46681 | 1 1/4″-12, 2.90″ Taper |
| 20 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | |
| 20 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 20 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | 2 | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 21 | 334-638 | Plate, Reinforcement | 2 | 45045-3 | |
| 22 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
RS 340 Tandem Suspension
Click on the part number for pricing and information!
| RS 340 Tandem Suspension | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front & Rear; LH/RH | 4 | See Chart | |
| 2 | 338-156 | Hanger; Overload | 2 | 48523-1 | w/34″ Frame Width |
| 3 | 338-158 | Plate, Saddle; Overload Cushion | 2 | 20781 | Optional |
| 4 | 325-100 | Load Cushion; Oil Resistant | 2 | 24209 | Optional |
| 5 | 325-103 | Load Cushion; Color Code Orange | 4 | 48973, 48972, 9047 | 60 Durometer; Oil Resistant |
| 6 |
SP
|
Assembly, Saddle | 2 | Specify Casting No. & Height (“A”); Incl. Key Nos. 7, 8, 11, 14, 15 | |
| 7 | 321-125 | Bushing, Saddle; 2″ID x 4 1/8″OD x 4″Lg | 4 | 19279 | |
| 8 | 338-160 | Cap, Saddle Bushing Retainer | 4 | 5917 | |
| 9 | 334-117 | Washer; 1 9/16″ID x 3 1/4″OD x 3/16″ Thk | 4 | 8536 | 3/8″ Flange |
| 10 | 334-118 | Nut, Nylok; 1 1/2″-12 | 4 | 25151 | |
| 11 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | |
| 12 | 334-145 | Kit, Control; Rebound | 2 | 31005-1 | Incl. (2) Bumpers & (2) Nuts |
| 13 | 334-102 | Cross Tube; 1 15/16″x 44 7/8″Lg | 1 | 44642-8 | |
| 14 | 338-123 | Cap, Saddle; 4″ c/c, x 1″ Dia | 4 | 6662 | |
| 15 | 334-151 | Assembly, Stud; 7/8″-14-9 x 4 1/2″Lg | 8 | 9029 | Incl. Stud, Lock Nut & Washer |
| 16 |
SP
|
Assembly, Beam | 2 | See Chart | |
| 17 | 321-117 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 6664 | Welded in Plug |
| 17 | 321-118 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22279 | Plug Included |
| 17 |
321-119
|
Bushing, Beam Center; Rubber | 2 | 29481-5 | Severe Duty; Fully Bonded; w/Transverse Rods |
| 18 | 334-190 | Plug, End; 1 15/16″Dia. x 3/16″Thk | 2 | 22278 | |
| 19 | 322-104 | Kit, Bushing; Bronze Center | 1 | 30436 | Incl. Key No. 18-21 |
| 20 | 334-104 | Sleeve; 2″ID x 2 3/4″OD x 12″Lg | 2 | 14684 | |
| 21 | 334-105 | Seal; 2 11/16″ID x 3 5/8″OD x 1/4″Thk | 4 | 30333 | |
| 22 | 334-106 | Washer; 2 3/4″ID x 4 5/8″OD x 1/8″Thk | 8 | 32364 | |
| 23 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 24 | 334-380 | Kit, Bushing & Adapter | 4 | 34013-48 | Incl. 321-120 Bushing & 334-108 Adapter |
| 24 | 334-381 | Kit, Bushing & Adapter | 4 | 34013-49 | Incl. 321-126 Bushing & 334-109 Adapter |
| 25 | 321-120 | Bushing, Beam End; Rubber; 5 1/4″Lg | 4 | 6969 | |
| 25 | 321-126 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 45900 | |
| 26 | 334-108 | Adapter Kit, Solid Adapters | 4 | 45000-13 | Use w/ 5 1/4″ Bushing |
| 26 | 334-109 | Adapter Kit, Solid Adapters | 4 | 45000-7 | Use w/ 5 3/4″ Bushing |
| 27 |
334-110
|
Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-14 | Use w/ 5 1/4″ Bushing |
| 27 | 334-111 | Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-8 | Use w/ 5 3/4″ Bushing |
| 28 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
| 29 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 29 | 345-610 | Torque Rod End; Female; Straddlemount | AR | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 29 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | AR | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
RS 380/400/440/460 Tandem Suspensions
Click on the part number for pricing and information!
| RS 380/400/440/460 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front & Rear; LH/RH | 4 | See Chart | |
| 2 | 338-156 | Hanger; Overload | 2 | 48523-1 | w/34″ Frame Width |
| 3 | 338-158 | Plate, Saddle; Overload Cushion | 2 | 20781 | Optional |
| 4 | 325-100 | Load Cushion; Oil Resistant | 2 | 24209 | Optional |
| 5 | 325-103 | Load Cushion; Color Code Orange | 4 | 48973, 48972 | 60 Durometer; Oil Resistant |
| 5 | 325-104 | Load Cushion; Color Code Yellow | 4 | 26953 | 70 Durometer; Oil Resistant |
| 6 | 338-743 | Assembly, Saddle; “A” = 12 1/4″ | 2 | 8606-67 | Casting No. 10711-1; Incl. Bushing, Cap & Stud |
| 6 | 338-744 | Assembly, Saddle; “A” = 14″ | 2 | 8606-80 | Casting No. 10711-2; Incl. Bushing, Cap & Stud |
| 6 | 338-745 | Assembly, Saddle; “A” = 12 7/8″ | 2 | 8606-107 | Casting No. 10711-5; Incl. Bushing, Cap & Stud |
| 6 | 338-1978 | Assembly, Saddle; “A” = 15 1/4″ | 2 | 8606-81 | Incl. Bushing, Cap & Stud |
| 7 | 321-125 | Bushing, Saddle; 2″ID x 4 1/8″OD x 4″Lg | 4 | 19279 | |
| 8 | 338-160 | Cap, Saddle Bushing Retainer | 4 | 5917 | |
| 9 | 334-117 | Washer; 1 9/16″ID x 3 1/4″OD x 3/16″ Thk | 4 | 8536 | 3/8″ Flange |
| 10 | 334-118 | Nut, Nylok; 1 1/2″-12 | 4 | 25151 | |
| 11 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | |
| 12 | 334-145 | Kit, Control; Rebound | 2 | 31005-1 | Incl. (2) Bumpers & (2) Nuts |
| 13 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 14 | 338-1831 | Cap, Saddle | 4 | 58795 | R400/520; Replaces 338-148 |
| 15 | 334-172 | Assembly, Stud; 7/8″-14-9 x 5 3/8″Lg | 8 | 9030 | Incl. Stud, Lock Nut & Washer |
| 16 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 17 | 321-122 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 5919 | 380 Series |
| 17 | 321-123 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22282 | Plug Included; 380 Series |
| 17 | 321-124 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 29483-5 | Severe Duty; Fully Bonded; w/Transverse Rods |
| 17 | 321-243 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 49400 | High Confinement; 400 Series; Standard |
| 17 | 321-244 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 49600 | High Confinement; 400 Series; Standard |
| 18 | 334-191 | Plug, End; 2 7/16″Dia. X 3/16″Thk | 2 | 22281 | |
| 19 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | Incl. Keys 20-24 for (2) Beams |
| 19 | 322-102A | Kit, Bushing; Bronze Center | 2 | 34013-54 | For (1) Beam |
| 20 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 21 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 22 | 334-115 | Seal; 3 7/16″ID x 4 3/4″OD x 1/4″Thk | 4 | 30334 | |
| 23 | 334-116 | Washer; 3 1/2″ID x 5 3/4″OD x 1/8″Thk | 8 | 32365 | |
| 24 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 25 | 334-381 | Kit, Bushing & Adapter | 4 | 34013-49 | Incl. 321-126 Bushing & 334-109 Adapter |
| 25 | 334-428 | Kit, Bushing & Adapter | 4 | 34013-50, 34013-73 | Incl. 321-242 Bushing & 334-467 Adapter Assy. |
| 26 | 321-126 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 45900 | 380 thru 440 Series |
| 26 | 321-242 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 29878-1 | 460 Series |
| 27 | 334-109 | Adapter Kit, Solid Adapters | 4 | 45000-7 | Use w/ 5 3/4″ Bushing |
| 27 | 334-467 | Adapter Kit | 4 | 21140-34 | Incl. 1″ Bolt; for 5 3/4″ Bushings; 450/480 Series |
| 28 | 334-111 | Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-8 | Use w/ 5 3/4″ Bushing |
| 29 | 334-830 | Kit, Service; Bar Pin Bushing; Non Shim | 4 | 34013-87 | Incl. Bar Pin Bushing & Mounting Hdwe. |
| 30 | 334-831 | Kit, Service; Bar Pin Bushing; Shim Type | 4 | 34013-88 | Incl. Bar Pin Bushing, Alignment Shims & Mounting Hdwe. |
| 30 | 334-1957 | Kit, Service; Rotating Bar Pin Bushing; Shim Type | 4 | 34013-188 | Incl. Bolts & Shims |
| 31 | 334-832 | Assembly, Bolt; 1″-8 x 6″Lg Grade 8 | 8 | 48941 | Incl. Bolt, Lock Nut & Washers |
| 32 | 334-880 | Shim; 1/8″ | AR | 50131 | |
| 32 | 334-879 | Shim; 3/16″ | AR | 50130 | |
| 32 | 334-881 | Shim; 3/8″ | AR | 57026 | |
| 33 |
SP
|
Kit, Bar Pin End Bushing Adapter Tool Tool Kit | 1 | 1749 | Not Shown |
| 34 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 34 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 34 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | 2 | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 35 |
SP
|
Kit, Torque Rod; Transverse | 2 | 50234-000A | Use 345-610 & 345-681 |
| 35 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 35 | 345-681 | Torque Rod End; Male; Taper Stud; 22 1/2″Lg | 2 | 46681 | 1 1/4″-12, 2.90″ Taper |
| 36 | 334-638 | Plate, Reinforcement | 2 | 45045-3 | Torque Rod Plate |
| 37 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
RS 450/480/520 Tandem Suspensions
Click on the part number for pricing and information!
| RS 450/480/520 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front & Rear; LH/RH | 4 | Various | See Chart |
| 2 | 338-156 | Hanger; Overload | 2 | 48523-1 | w/34″ Frame Width |
| 2 |
338-1208
|
Hanger | 2 | 48525-1 | w/ 34 1/2″ Frame Width |
| 3 | 338-158 | Plate, Saddle; Overload Cushion | 2 | 20781 | |
| 4 | 325-100 | Load Cushion; Oil Resistant | 2 | 24209 | Optional |
| 5 | 325-104 | Load Cushion; Color Code Yellow | 4 | 26953 | 70 Durometer; Oil Resistant |
| 6 |
SP
|
Assembly, Saddle | 2 | 8606-XXX | Specify Casting No. & Dim. “A” |
| 7 | 334-1125 | Ring, Bearing | 4 | 50780 | |
| 8 | 321-125 | Bushing, Saddle; 2″ID x 4 1/8″OD x 4″Lg | 4 | 19279 | |
| 9 | 338-160 | Cap, Saddle Bushing Retainer | 4 | 5917 | |
| 10 | 334-117 | Washer; 1 9/16″ID x 3 1/4″OD x 3/16″ Thk | 4 | 8536 | 3/8″ Flange |
| 11 | 334-118 | Nut, Nylok; 1 1/2″-12 | 4 | 25151 | |
| 12 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | |
| 13 | 334-145 | Kit, Control; Rebound | 2 | 31005-1 | Incl. (2) Bumpers & (2) Nuts |
| 14 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 14 | 334-1126 | Cross Tube; 46″Lg | 1 | 7622-3 | |
| 15 | 338-1831 | Cap, Saddle | 4 | 58795 | R400/520; Replaces 338-148 |
| 16 | 334-172 | Assembly, Stud; 7/8″-14-9 x 5 3/8″Lg | 8 | 9030 | Incl. Stud, Lock Nut & Washer |
| 17 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 18 | 321-124 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 29483-5 | Severe Duty; Fully Bonded; w/Transverse Rods |
| 18 | 321-510 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 34013-97 | R520 |
| 19 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | Incl. Keys 20-24 for (2) Beams |
| 19 | 322-102A | Kit, Bushing; Bronze Center | 2 | 34013-54 | For (1) Beam |
| 20 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 21 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 22 | 334-115 | Seal; 3 7/16″ID x 4 3/4″OD x 1/4″Thk | 4 | 30334 | |
| 23 | 334-116 | Washer; 3 1/2″ID x 5 3/4″OD x 1/8″Thk | 8 | 32365 | |
| 24 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 25 | 334-428 | Kit, Bushing & Adapter | 4 | 34013-50, 34013-73 | Incl. 321-242 Bushing & 334-467 Adapter Assy. |
| 26 | 321-242 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 29878-1 | 450 & 480 Series |
| 26 | 321-127 | Bushing, Beam End; Rubber; 6″Lg | 4 | 45407 | 520 Series |
| 27 | 334-126 | Adapter, Split Ring Type; 520 Series | 4 | 21140-23 | Use w/6″ Bushing |
| 27 | 334-127 | Adapter, Split Ring Type; 450,480 Series | 4 | 21140-28 | Use w/ 5 3/4″ Bushing |
| 28 | 334-467 | Adapter Kit | 4 | 21140-34 | Incl. 1″ Bolt; for 5 3/4″ Bushings; 450/480 Series |
| 29 | 334-830 | Kit, Service; Bar Pin Bushing; Non Shim | 4 | 34013-87 | Incl. Bar Pin Bushing & Mounting Hdwe. |
| 30 | 334-831 | Kit, Service; Bar Pin Bushing; Shim Type | 4 | 34013-88 | Incl. Bar Pin Bushing, Alignment Shims & Mounting Hdwe. |
| 30 | 334-1957 | Kit, Service; Rotating Bar Pin Bushing; Shim Type | 4 | 34013-188 | Incl. Bolts & Shims |
| 31 | 334-832 | Assembly, Bolt; 1″-8 x 6″Lg Grade 8 | 8 | 48941 | Incl. Bolt, Lock Nut & Washers |
| 32 | 334-880 | Shim; 1/8″ | AR | 50131 | |
| 32 | 334-879 | Shim; 3/16″ | AR | 50130 | |
| 32 | 334-881 | Shim; 3/8″ | AR | 57026 | |
| 33 |
SP
|
Kit, Bar Pin End Bushing Adapter Tool | 1 | 1749 | Not Shown |
| 34 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 34 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 34 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | 2 | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 35 | 345-897 | Kit, Torque Rod; Straddle/Taper Pin | 2 | 60215 | Use 345-610 & 345-681 |
| 35 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 35 | 345-681 | Torque Rod End; Male; Taper Stud; 22 1/2″Lg | 2 | 66681, 46681 | 1 1/4″-12, 2.90″ Taper |
| 36 | 334-638 | Plate, Reinforcement | 2 | 45045-3 | Torque Rod Plate |
RS 500/650 Tandem Suspensions
Click on part number for pricing and information!
| RS 500/650 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
SP
|
Hanger, Front & Rear; LH/RH | 4 | Various | Provide Casting No., Position & OEM |
| 2 |
SP
|
Hanger, Center | 2 | Various | Provide Casting No. & OEM |
| 3 | 325-104 | Load Cushion; Color Code Yellow | 6 | 26953 | 70 Durometer; Oil Resistant |
| 4 |
SP
|
Assembly, Saddle | 2 | Various | Provide Casting No. & Height “A” |
| 5 | 321-125 | Bushing, Saddle; 2″ID x 4 1/8″OD x 4″Lg | 4 | 19279 | |
| 6 | 338-160 | Cap, Saddle Bushing Retainer | 4 | 5917 | |
| 7 | 334-117 | Washer; 1 9/16″ID x 3 1/4″OD x 3/16″ Thk | 4 | 8536 | 3/8″ Flange |
| 8 | 334-118 | Nut, Nylok; 1 1/2″-12 | 4 | 25151 | |
| 9 | 334-145 | Kit, Control; Rebound | 2 | 31005-1 | Incl. (2) Bumpers & (2) Nuts |
| 10 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | |
| 11 |
SP
|
Assembly, Beam | 2 | Various | Provide Casting No. |
| 12 | 334-134 | Tube, Cross; 3″ x 40 3/4″Lg | 1 | 10397-14 | |
| 12 | 334-189 | Tube, Cross; 3″ x 44 3/4″Lg | 1 | 10397-2 | |
| 13 | 338-168 | Cap, Saddle; 5 1/2″ c/c x 1″ Bolt Holes | 4 | 15785 | |
| 14 | 334-187 | Assembly, Stud; 1-14 x 5 7/8″Lg | 8 | Incl. Stud, Washer & Lock Nut | |
| 15 | 321-128 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 10366 | Welded in Plug |
| 16 |
322-107
|
Kit, Bushing; Bronze Center | 1 | 45374 | |
| 17 | 322-108 | Bushing, Bronze Center; 4″ID x 5 1/2″OD x 8 11/16″Lg | 2 | 30240-5 | |
| 18 | 334-137 | Washer, Thrust; 4″ID x 6 11/16″OD x 3/16″Thk | 4 | 45261 | |
| 19 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 20 | 321-129 | Bushing, Beam End; Rubber; 6″Lg | 4 | 10363 | |
| 21 | 334-138 | Adapter Kit, Solid Adapters; 2″OD x 12 5/8″Lg, 1 7/8″-12 Thread | 4 | 21140-7 | |
| 22 | 334-141 | Adapter Kit w/Tube & Nut; 3″OD x 9 3/4″Lg x 3″-12 Thread | 4 | 21140-6 | |
| 23 |
SP
|
Torque Rod, Rigid | 2 | 45577-XXX | Hendrickson P/N Stamped on Rod. Provide No. for Proper Identification |
RT/RTE 441/480 Tandem Suspensions
Click on the part number for pricing and information!
| RT/RTE 441/480 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front | 2 | See Chart | |
| 2 |
See Chart
|
Hanger, Rear | 2 | See Chart | |
| 3 |
See Chart
|
Hanger, Extended Leaf | 2 | See Chart | |
| 4 | 338-108 | Pad, Top | 2 | 35064 | |
| 5 |
See Chart
|
Saddle Bolt Assembly | 8 | Incl. Washer & Nut; See Chart | |
| 6 | 334-101 | Assembly, Set Screw; 3/4″-10 x 3 1/4″Lg | 4 | 35370-2 | Incl. Washer & Nut |
| 7 | 327-107 | Spring Pin; 1 3/8″OD x 7 11/32″Lg x 5/8″ c/e | 2 | 32277 | Single Lock |
| 7 | 327-437 | Spring Pin; 1 3/8″OD x 6 7/8″Lg x 5 3/8″ c/c | 2 | 43146 | Double Lock |
| 8 | 322-101 | Bushing; 1 3/8″ID x 1 5/8″OD x 4″Lg | 2 | 30057-8 | |
| 9 | 334-112 | Assembly, Pin; Lock | 4-Feb | 62-1 | Incl. Washer & Nut |
| 9 | 334-131 | Bolt Assembly; 1/2″-13 x 4″Lg | 4-Feb | 46825-1 | Incl. Bolt & Hdwe. |
| 10 | 334-100 | Assembly, Rebound; 1/2″OD x 6 1/2″Lg | 2 | 29828-23 | Incl. Roller, Washer & Nut |
| 11 | 338-161 | Assembly, Saddle; “A” = 6″ | 2 | 31017-53 | Casting No. 32796, 13088-2, 35208-1; Reinforced |
| 12 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 13 | 338-1831 | Cap, Saddle | 4 | 58795, 48545 | R400/520; Replaces 338-148 |
| 14 | 334-174 | Assembly, Stud; 7/8″-14 x 4 7/8″Lg | 8 | 6696 | Incl. Stud, Lock Nut & Washer |
| 15 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 16 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | For (2) Beams |
| 16 | 322-102A | Kit, Bushing; Bronze Center | 2 | 34013-54 | For (1) Beam |
| 17 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 18 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 19 | 334-115 | Seal; 3 7/16″ID x 4 3/4″OD x 1/4″Thk | 4 | 30334 | |
| 20 | 334-116 | Washer; 3 1/2″ID x 5 3/4″OD x 1/8″Thk | 8 | 32365 | |
| 21 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 22 | 334-440 | Kit, Service; Bronze Beam End Bushing; 4 Ends | 1 | 34013-40 | Incl. (4) 334-184 Shaft Kits & (4) 322-109 Bushing Kits |
| 22 | 334-440A | Kit, Service; Bronze Beam End Bushing; 1 End | 4 | Incl. (1) 334-184 Shaft Kit & (1) 322-109 Bushing Kit | |
| 23 | 334-184 | Kit, Shaft; Bronze Beam End | 4 | Incl. Shaft, Slotted Nuts & Ball Seals | |
| 24 | 322-109 | Kit, Bushing; Beam End/Ball Assembly | 4 | 30625-7, 34013-57 | Incl. Bushing Halves, Ball & Hdwe. |
| 25 | 334-179 | Shaft, Beam End; 1 3/8″-12 x 9 5/8″Lg | 4 | 3350 | |
| 26 | 334-180 | Nut, Slotted; 1 3/8″-12 | 8 | 8582 | Use w/334-179 Shaft |
| 27 | 334-430 | Ball Seal | 8 | 45229 | |
| 28 |
Find Spring
|
Assembly, Spring | 2 | See Leaf Spring Web Catalog For Details | |
RT/RTE 450/480/520, RT2/RTE2 480/520 Tandem Suspensions
Click on the part number for pricing and information!
| RT/RTE 450/480/520, RT2/RTE2 480/520 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front | 2 | See Chart | |
| 2 |
See Chart
|
Hanger, Rear | 2 | See Chart | |
| 3 |
See Chart
|
Hanger, Extended Leaf | 2 | See Chart | |
| 4 | 338-108 | Pad, Top | 2 | 35064 | |
| 5 |
See Chart
|
Saddle Bolt Assembly | 8 | Incl. Washer & Nut; See Chart | |
| 6 | 334-101 | Assembly, Set Screw; 3/4″-10 x 3 1/4″Lg | 2 | 35370-2 | Incl. Washer & Nut |
| 7 | 327-107 | Spring Pin; 1 3/8″OD x 7 11/32″Lg x 5/8″ c/e | 2 | 32277 | Single Lock |
| 7 | 327-437 | Spring Pin; 1 3/8″OD x 6 7/8″Lg x 5 3/8″ c/c | 2 | 43146 | Double Lock |
| 8 | 322-101 | Bushing; 1 3/8″ID x 1 5/8″OD x 4″Lg | 2 | 30057-8 | |
| 9 | 334-112 | Assembly, Pin; Lock | 4-Feb | 62-1 | Incl. Washer & Nut |
| 9 | 334-131 | Bolt Assembly; 1/2″-13 x 4″Lg | 4-Feb | 46825-1 | Incl. Bolt & Hdwe. |
| 10 | 334-100 | Assembly, Rebound; 1/2″OD x 6 1/2″Lg | 2 | 29828-23 | Incl. Roller, Washer & Nut |
| 11 | 338-161 | Assembly, Saddle; “A” = 6″ | 2 | 31017-53 | Casting No. 32796, 13088-2, 35208-1; Reinforced |
| 11 | 338-162 | Assembly, Saddle; High Back; “A” = 7 3/16″ | 2 | 31017-77 | Casting No. 47665, 47476 & 32102-1; For 50-239 Spring |
| 12 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 12 | 334-1126 | Cross Tube; 46″Lg | 1 | 7622-3 | |
| 13 | 338-1831 | Cap, Saddle | 4 | 58795, 48545 | R400/520; Replaces 338-148 |
| 14 | 334-174 | Assembly, Stud; 7/8″-14 x 4 7/8″Lg | 8 | 6696 | Incl. Stud, Lock Nut & Washer |
| 15 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 16 | 321-124 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 29483-5 | Severe Duty; Fully Bonded; w/Transverse Rods |
| 16 | 321-510 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 34013-97 | R520 |
| 17 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | For (2) Beams |
| 17 | 322-102A | Kit, Bushing; Bronze Center | 2 | For (1) Beam | |
| 18 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 19 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 20 | 334-115 | Seal; 3 7/16″ID x 4 3/4″OD x 1/4″Thk | 4 | 30334 | |
| 21 | 334-116 | Washer; 3 1/2″ID x 5 3/4″OD x 1/8″Thk | 8 | 32365 | |
| 22 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 23 | 334-428 | Kit, Bushing & Adapter | 4 | 34013-50 | Incl. 321-242 Bushing & 334-467 Adapter Assy. |
| 24 | 321-242 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 29878-1 | 450 & 480 Series |
| 24 | 321-127 | Bushing, Beam End; Rubber; 6″Lg | 4 | 45407 | 520 Series |
| 25 | 334-126 | Adapter, Split Ring Type; 520 Series | 4 | 21140-23 | Use w/6″ Bushing |
| 25 | 334-127 | Adapter, Split Ring Type; 450,480 Series | 4 | 21140-28 | Use w/ 5 3/4″ Bushing |
| 26 | 334-467 | Adapter Kit | 4 | 21140-34 | Incl. 1″ Bolt; for 5 3/4″ Bushings; 450/480 Series |
| 27 | 334-830 | Kit, Service; Bar Pin Bushing; Non Shim | 4 | 34013-87 | Incl. Bar Pin Bushing & Mounting Hdwe. |
| 28 | 334-831 | Kit, Service; Bar Pin Bushing; Shim Type | 4 | 34013-88 | Incl. Bar Pin Bushing, Alignment Shims & Mounting Hdwe. |
| 28 | 334-1957 | Kit, Service; Rotating Bar Pin Bushing; Shim Type | 4 | 34013-188 | Incl. Bolts & Shims |
| 29 | 334-832 | Assembly, Bolt; 1″-8 x 6″Lg Grade 8 | 8 | 48941 | Incl. Bolt, Lock Nut & Washers |
| 30 | 334-879 | Shim; 3/16″ | AR | 50130 | |
| 30 | 334-880 | Shim; 1/8″ | AR | 50131 | |
| 30 | 334-881 | Shim; 3/8″ | AR | 57026 | |
| 31 |
SP
|
Kit, Bar Pin End Bushing Adapter Tool | 1 | 1749 | |
| 32 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 33 | 345-897 | Kit, Torque Rod; Straddle/Taper Pin | AR | 60215 | Use 345-610 & 345-681 |
| 33 | 345-866 | Kit, Torque Rod; Straddlemount | AR | 60218 | Use 345-610 & 345-661 |
| 34 | 345-610 | Torque Rod End; Female; Straddlemount | AR | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 34 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | AR | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 34 | 345-681 | Torque Rod End; Male; Taper Stud; 22 1/2″Lg | AR | 66681, 46681 | 1 1/4″-12, 2.90″ Taper |
| 35 | 334-638 | Plate, Reinforcement | AR | 45045-3 | Torque Rod Plate |
| 36 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
| 37 |
Find Spring
|
Assembly, Spring | 2 | See Leaf Spring Web Catalog For Details | |
RU/RUE/U/UE 340, U2/UE2 340 Tandem Suspensions
Click on the part number for pricing and information!
| RU/RUE/U/UE 340, U2/UE2 340 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
See Chart
|
Hanger, Front | 2 | See Chart | |
| 2 |
See Chart
|
Hanger, Rear | 2 | See Chart | |
| 3 |
See Chart
|
Hanger, Extended Leaf | 2 | See Chart | |
| 4 | 338-124 | Pad, Top | 2 | 19281-1 | |
| 5 | 361-100 | Kit, U-Bolt; Special Bend, Grade 8 | 4 | 22303-2 | 7/8″ x 4″ X 9″ HS |
| 6 | 327-106 | Spring Pin; 1 1/4″OD x 7 11/32″Lg x 5/8″ c/e | 2 | 32276 | Single Lock |
| 6 | 327-107 | Spring Pin; 1 3/8″OD x 7 11/32″Lg x 5/8″ c/e | 2 | 32277 | Single Lock |
| 6 | 327-437 | Spring Pin; 1 3/8″OD x 6 7/8″Lg x 5 3/8″ c/c | 2 | 43146 | Double Lock |
| 7 | 322-100 | Bushing; 1 1/4″ID x 1 1/2″OD x 4″Lg | 2 | 30057-7 | |
| 7 | 322-101 | Bushing; 1 3/8″ID x 1 5/8″OD x 4″Lg | 2 | 30057-8 | |
| 8 | 334-112 | Assembly, Pin; Lock | 2 | 62-1 | Incl. Washer & Nut |
| 8 | 334-131 | Bolt Assembly; 1/2″-13 x 4″Lg | 2 | 46825-1 | Incl. Bolt & Hdwe. |
| 9 | 334-100 | Assembly, Rebound; 1/2″OD x 6 1/2″Lg | 2 | 29828-23 | Incl. Roller, Washer & Nut |
| 10 | 338-131 | Assembly, Saddle; “A” = 6 3/16″ | 2 | 31017-75 | Casting No. 43184; Incl. Cap & Stud |
| 10 | 338-132 | Assembly, Saddle; “A” = 7 5/16″ | 2 | 31017-76 | Casting No. 43145; Incl. Cap & Stud |
| 11 | 334-102 | Cross Tube; 1 15/16″x 44 7/8″Lg | 1 | 44642-8 | |
| 12 | 338-127 | Cap, Saddle; 4″ c/c x 13/16″ Holes | 4 | 19283-2 | |
| 13 | 334-165 | Assembly, Stud; 3/4″-16/16 x 4 1/8″Lg | 8 | 23441-4 | Incl. Stud, Washer & Lock Nut |
| 14 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 15 | 321-117 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 6664 | Welded in Plug |
| 15 | 321-118 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22279 | Plug Included |
| 16 | 334-190 | Plug, End; 1 15/16″Dia. x 3/16″Thk | 2 | 22278 | |
| 17 | 334-380 | Kit, Bushing & Adapter | 4 | 34013-48 | Incl. 321-120 Bushing & 334-108 Adapter |
| 17 | 334-381 | Kit, Bushing & Adapter | 4 | 34013-49 | Incl. 321-126 Bushing & 334-109 Adapter |
| 18 | 321-120 | Bushing, Beam End; Rubber; 5 1/4″Lg | 4 | 6969 | |
| 18 | 321-126 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 45900 | |
| 19 | 334-108 | Adapter Kit, Solid Adapters | 4 | 45000-13 | Use w/ 5 1/4″ Bushing |
| 19 | 334-109 | Adapter Kit, Solid Adapters | 4 | 45000-7 | Use w/ 5 3/4″ Bushing |
| 20 |
334-110
|
Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-14 | Use w/ 5 1/4″ Bushing |
| 20 | 334-111 | Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-8 | Use w/ 5 3/4″ Bushing |
| 21 | 334-830 | Kit, Service; Bar Pin Bushing; Non Shim | 4 | 34013-87 | Incl. Bar Pin Bushing & Mounting Hdwe. |
| 22 | 334-831 | Kit, Service; Bar Pin Bushing; Shim Type | 4 | 34013-88 | Incl. Bar Pin Bushing, Alignment Shims & Mounting Hdwe. |
| 22 | 334-1957 | Kit, Service; Rotating Bar Pin Bushing; Shim Type | 4 | 34013-188 | Incl. Bolts & Shims |
| 23 | 334-832 | Assembly, Bolt; 1″-8 x 6″Lg Grade 8 | 8 | 48941 | Incl. Bolt, Lock Nut & Washers |
| 24 | 334-879 | Shim; 3/16″ | AR | 50130 | |
| 24 | 334-880 | Shim; 1/8″ | AR | 50131 | |
| 24 | 334-881 | Shim; 3/8″ | AR | 57026 | |
| 25 |
SP
|
Kit, Bar Pin End Bushing Adapter Tool | 1 | 1749 | Not Shown |
| 26 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
| 27 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 27 | 345-610 | Torque Rod End; Female; Straddlemount | AR | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 27 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | AR | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 28 |
Find Spring
|
Assembly, Spring | 2 | See Leaf Spring Web Catalog For Details | |
SR 340/380 Tandem Suspensions
Click on the part number for pricing and information!
| SR 340/380 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
338-163
|
Hanger; Undrilled | 4 | 23217-13 | Casting No. 21283-1; Incl. Washer & Nut |
| 2 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | |
| 3 |
321-143
|
Bushing, Shear Spring; 6″ID x 6 15/16″OD x 3/16″Thk | 8 | 15137 | Double Stacked |
| 4 | 334-120 | Spacer; 6″ID x 6 7/8″OD x 3/16″Thk | 4 | 21278 | |
| 5 | 334-118 | Nut, Nylok; 1 1/2″-12 | 4 | 25151 | |
| 6 |
See Chart
|
Beam Assembly | 2 | Incl. Bushing; See Chart | |
| 7 | 334-102 | Cross Tube; 1 15/16″x 44 7/8″Lg | 1 | 44642-8 | |
| 7 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 8 | 338-123 | Cap, Saddle; 4″ c/c, x 1″ Dia | 4 | 6662 | SR-340 |
| 8 | 338-1831 | Cap, Saddle | 4 | 58795 | R400/520; Replaces 338-148 |
| 9 | 334-151 | Assembly, Stud; 7/8″-14-9 x 4 1/2″Lg | 8 | 9029 | Incl. Stud, Lock Nut & Washer |
| 9 | 334-172 | Assembly, Stud; 7/8″-14-9 x 5 3/8″Lg | 8 | 9030 | Incl. Stud, Lock Nut & Washer |
| 10 | 321-117 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 6664 | Welded in Plug |
| 10 | 321-118 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22279 | Plug Included |
| 10 | 321-122 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 5919 | 380 Series |
| 10 | 321-123 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22282 | Plug Included; 380 Series |
| 11 | 334-190 | Plug, End; 1 15/16″Dia. x 3/16″Thk | 2 | 22278 | SR-340 |
| 11 | 334-191 | Plug, End; 2 7/16″Dia. X 3/16″Thk | 2 | 22281 | SR-380 |
| 12 | 334-380 | Kit, Bushing & Adapter | 4 | 34013-48 | Incl. 321-120 Bushing & 334-108 Adapter |
| 12 | 334-381 | Kit, Bushing & Adapter | 4 | 34013-49 | Incl. 321-126 Bushing & 334-109 Adapter |
| 13 | 321-120 | Bushing, Beam End; Rubber; 5 1/4″Lg | 4 | 6969 | |
| 13 | 321-126 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 45900 | |
| 14 | 334-108 | Adapter Kit, Solid Adapters | 4 | 45000-13 | Use w/ 5 1/4″ Bushing |
| 14 | 334-109 | Adapter Kit, Solid Adapters | 4 | 45000-7 | Use w/ 5 3/4″ Bushing |
| 15 |
334-110
|
Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-14 | Use w/ 5 1/4″ Bushing |
| 15 | 334-111 | Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-8 | Use w/ 5 3/4″ Bushing |
| 16 | 339-102 | Kit, Maintenance; Walking Beam; Welded Plugs | 1 | Incl. (2) 321-122, (4) 334-381 & (2) Beams | |
| 16 | 339-131 | Kit, Maintenance; Walking Beam; Loose Plugs | 1 | Incl. (2) 321-123, (4) 334-381 & (2) Beams | |
| 17 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 17 | 345-610 | Torque Rod End; Female; Straddlemount | AR | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 17 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | AR | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 18 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |
T Series Walking Beam Suspensions
Click on the part number for pricing and information!
| T Series Walking Beam Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 | 334-572 | Shaft; 12″Lg. x 3″ID x 4″OD | 2 | 3418 | T600 Suspension; Use 334-575 Kit |
| 2 |
322-131
|
Bushing, Bronze Center | 4 | 3415 | T600; 4″ I.D., 1/4″ Lip |
| 3 | 334-571 | Washer, Thrust | 4 | 3416 | T600/900 |
| 4 | 334-431 | Kit, Service; Beam Center | 2 | 34013-78 | T600 Solid Shaft |
| 4 | 334-575 | Kit, Service; Beam Center | 2 | 34013-79 | T600 Suspension |
| 5 | 322-103 | Bushing, Bronze Center; 3 1/2″ID x 4 3/4″OD x 5 7/8″Lg | 2 | 30240-2 | |
| 6 | 334-114 | Sleeve, Center; 2 1/2″ID x 3 1/2″OD x 12″Lg | 2 | 14685 | |
| 7 | 334-135 | Seal; 4″ID x 5 1/2″OD x 3/8″Thk | 4 | 31577 | |
| 8 |
SP
|
Washer, Thrust | 4 | 32365-4 | |
| 9 | 334-107 | Fitting, Grease; 2 5/8″Lg x 1/8″-27 NPT | 2 | 30087 | |
| 10 | 322-102 | Kit, Bushing; Bronze Center | 1 | 30437 | |
| 10 | 322-102A | Kit, Bushing; Bronze Center | 2 | 34013-54 | For (1) Beam |
| 11 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | T440-520 |
| 12 | 334-179 | Shaft, Beam End; 1 3/8″-12 x 9 5/8″Lg | 4 | 3350 | |
| 13 | 334-430 | Ball Seal | 8 | 45229 | |
| 14 | 334-180 | Nut, Slotted; 1 3/8″-12 | 8 | 8582 | Use w/334-179 Shaft |
| 15 | 334-184 | Kit, Shaft; Bronze Beam End | 4 | Incl. Shaft, Slotted Nuts & Ball Seals | |
| 16 | 334-1131 | Bushing Set, Bronze | 4 | 5059, | |
| 17 | 334-1132 | Bronze End Ball Socket | 4 | 4990, | |
| 18 | 334-440 | Kit, Service; Bronze Beam End Bushing; 4 Ends | 1 | 34013-40 | Incl. (4) 334-184 Shaft Kits & (4) 322-109 Bushing Kits |
| 18 | 334-440A | Kit, Service; Bronze Beam End Bushing; 1 End | 4 | 34013-40 | Incl. (1) 334-184 Shaft Kit & (1) 322-109 Bushing Kit |
| 19 | 334-449 | Adapter, Reducer/Spacer | 8 | 8580 | |
\
V4 340/380 Tandem Suspensions
Click on the part number for pricing and information!
| V4 340/380 Tandem Suspensions | |||||
| Key | Part Number | Description | No. Req | OEM Reference | Remarks |
| 1 |
338-169
|
Hanger | 2 | 46202-1 | Casting No. 46205; Drilled |
| 1 |
338-170
|
Hanger | 2 | 46202-5 | Casting No. 46205; Drilled |
| 2 |
338-171
|
Hanger | 4 | 46970-2 | Use w/45872-1 Elastic Module |
| 3 |
338-172
|
Stop | 4 | 46210 | Drilled; Use w/45872-1 Elastic Module |
| 4 |
321-130
|
Module, Elastic; w/Internal Jounce Stop | 4 | 47585-85 | Obsolete |
| 5 | 334-144 | Assembly, Stud; 5/8″ x 3″Lg | 8 | 19111-1 | Obsolete |
| 6 |
334-119
|
Clamp, Module; 2″W x 1 5/8″Lg x 3/4″High w/ 11/16″ Hole | 8 | 21297 | |
| 7 |
See Chart
|
Beam Assembly | 2 | See Chart | |
| 8 | 334-102 | Cross Tube; 1 15/16″x 44 7/8″Lg | 1 | 44642-8 | |
| 8 | 334-113 | Cross Tube; 2 7/16″ x 44 7/8″Lg | 1 | 44643-9 | |
| 9 | 338-123 | Cap, Saddle; 4″ c/c, x 1″ Dia | 4 | 6662 | V4-340 |
| 9 | 338-1831 | Cap, Saddle | 4 | 58795 | R400/520; Replaces 338-148 |
| 10 | 334-151 | Assembly, Stud; 7/8″-14-9 x 4 1/2″Lg | 8 | 9029 | Incl. Stud, Lock Nut & Washer |
| 10 | 334-172 | Assembly, Stud; 7/8″-14-9 x 5 3/8″Lg | 8 | 9030 | Incl. Stud, Lock Nut & Washer |
| 11 | 321-117 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 6664 | Welded in Plug |
| 11 | 321-118 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22279 | Plug Included |
| 11 | 321-122 | Bushing, Beam Center; Rubber; Welded Plug | 2 | 5919 | 380 Series |
| 11 | 321-123 | Bushing, Beam Center; Rubber; Loose Plug | 2 | 22282 | Plug Included; 380 Series |
| 12 | 334-190 | Plug, End; 1 15/16″Dia. x 3/16″Thk | 2 | 22278 | V4-340 |
| 12 | 334-191 | Plug, End; 2 7/16″Dia. X 3/16″Thk | 2 | 22281 | V4-380 |
| 13 | 334-380 | Kit, Bushing & Adapter | 4 | 34013-48 | Incl. 321-120 Bushing & 334-108 Adapter |
| 13 | 334-381 | Kit, Bushing & Adapter | 4 | 34013-49 | Incl. 321-126 Bushing & 334-109 Adapter |
| 14 | 321-120 | Bushing, Beam End; Rubber; 5 1/4″Lg | 4 | 6969 | |
| 14 | 321-126 | Bushing, Beam End; Rubber; 5 3/4″Lg | 4 | 45900 | |
| 15 | 334-108 | Adapter Kit, Solid Adapters | 4 | 45000-13 | Use w/ 5 1/4″ Bushing |
| 15 | 334-109 | Adapter Kit, Solid Adapters | 4 | 45000-7 | Use w/ 5 3/4″ Bushing |
| 16 |
334-110
|
Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-14 | Use w/ 5 1/4″ Bushing |
| 16 | 334-111 | Adapter Kit, Solid/Split Ring Adapters | 4 | 45000-8 | Use w/ 5 3/4″ Bushing |
| 17 | 339-102 | Kit, Maintenance; Walking Beam; Welded Plugs | 1 | Incl. (2) 321-122, (4) 334-381 & (2) Beams | |
| 17 | 339-131 | Kit, Maintenance; Walking Beam; Loose Plugs | 1 | Incl. (2) 321-123, (4) 334-381 & (2) Beams | |
| 18 |
SP
|
Torque Rod, Rigid | 2 | 32271-XXX | Hendrickson P/N Stamped on Rod; Provide No. for Proper Identification or Use 345-610 & 345-661 |
| 18 | 345-610 | Torque Rod End; Female; Straddlemount | 2 | 66610, 46610 | 5/8″ Bolts, 4 3/8″ Spacing |
| 18 | 345-661 | Torque Rod End; Male; Straddlemount; 22 1/2″Lg | 2 | 66661, 46661 | 5/8″ Bolts, 4 3/8″ Spacing |
| 19 | 338-181 | Bracket, Track Rod/Frame | 2 | 22186 | For 5/8″ Bolts |